Products

Penetron Admix

PENETRON ADMIX™ is an additive mixed into new concrete at the time of batching for complete integral waterproofing. Penetron Admix is added to the concrete mix at the time of batching. The concrete then becomes permanently sealed against the penetration of water or other liquids from any direction and is protected from deterioration due to harsh environmental conditions.

Penetron

PENETRON™ is used for waterproofing and chemical protection above and below ground level; applied in slurry form.Penetron cementitious capillary waterproofing products are formulations consisting of common cement, quartz sand (of special grade) and multiple activating chemicals that provide the most effective, permanent concrete waterproofing.

Peneplug

PENEPLUG forms a rapid setting compound capable of stopping severe leaks under pressure.PenePlug is a fast-setting cementitious water-stop. It is recommended for: Plugging/stopping water leaks, Sealing of leaky joints and form tie holes or cracks.

Penebar SW-55

Penebar SW-55™ is a concrete joint water-stop that will expand in a controlled fashion when exposed to water. A sophisticated water-sealing product that encapsulates hydrophilic materials into a rubber base to create a built-in delay system.Penebar SW-55 is a concrete joint water-stop that will expand in a controlled fashion when exposed to water. A sophisticated water-sealing product that encapsulates hydrophilic materials into a rubber base to create a built-in delay system.

Penecrete Mortar

PENECRETE MORTAR™ is used for filling cracks and covers at joints, and to fill form tie holes, honeycomb areas and routed out cracks in mortar consistency. Penecrete Mortar is a cementitious, ready-mixed waterproof repairing and sealing mortar.

Peneseal FH

Peneseal FH™ is a transparent, chemically active, water-based sealer that penetrates concrete and masonry building materials, protecting, preserving and strengthening them permanently. A clear, reactive penetrating sealer designed to permanently protect, preserve and strengthen concrete and masonry building materials. PENESEAL FH penetrates deep into concrete surfaces and reacts with the elemental concrete ingredients to solidify them into a harder, denser, stronger concrete mass.Alkali salts and minerals are flushed out in the process, eliminating efflorescence and leaching, and increasing bonding of surface coatings.

Block Seal

Block Seal is a waterproof, cement-based, heavy-duty masonry coating which stops water penetration and prevents water damage while protecting and beautifying concrete and other masonry surfaces. Block Seal is available in grey and it provides more waterproof protection that paint-type coatings. Block Seal is a waterproof, cement-based, heavy-duty masonry coating which stops water penetration and prevents water damage while protecting and beautifying concrete and other masonry surfaces. Block Seal is available in grey and it provides more waterproof protection than paint-type coatings.